Knowledge Base

Beagle SGX driver causes usb to stop working   ________________________________________________________________________ Applicable Environment ________________________________________________________________________ Topic: Beagle SGX driver causes usb to stop working SDP: 6.4.1 Target: OMAP3530 ________________________________________________________________________ Recommendation ________________________________________________________________________ The Beagle OMAP3530 is powered through a standard USB port. Turning on the SGX graphics controller will cause USB devices to stop working due to the lack of current for USB devices. Connect a powered hub in between the Beagle and the USB devices if you require USB devices and the SGX running simultaneously. ________________________________________________________________________ NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns. ________________________________________________________________________ Related Attachments  None Found

Please contact us with your questions or concerns.